Kinesis Bike Frame Touch Up Paint - Kinesis Bikes
Kinesis - Frames - Spares - Touch Up Paint

Touch Up Paint


Base coat touch-up paints for Kinesis Bikes.

£8.00

These touch up paint colours are base coat colours which means they require a secondary application of clear lacquer once the base coat is dry (approx 20- 30 minutes at room temperature) to achieve the correct gloss level. Without the clear coat topping the paints will dry matt.

See under ‘Additional Info’ for Paint Stick User Guide.

Swatch Reference Information

Frame Name. Model No. Colour Name. Product Code. Swatch
4S Disc – Blue 001 4S Disc – Blue K-PAINT-001-RB
AT – Outrageous Orange 002 AT – Outrageous Orange K-PAINT-002-OO
4S Disc – Shocking Pink 003 4S Disc – Shocking Pink K-PAINT-003-SP
AT – Harris Green 004 AT – Harris Green K-PAINT-004-HP
RTD – Space Black Metallic 006 RTD – Space Black Metallic K-PAINT-006-SB
RTD – Orca White 007 RTD – Orca White K-PAINT-007-OW
Aithein RB 2020 – Grey Metallic 008 Aithein RB 2020 – Grey Metallic K-PAINT-008-GM
Aithein DB 2020 – Deep Purple Metallic 009 Aithein DB 2020 – Deep Purple MetallicK-PAINT-009-DP
Aithein DB 2020 – Dazzling Silver Metallic 010 Aithein DB 2020 – Dazzling Silver Metallic K-PAINT-010-DS
G2 – Slate Blue 012 G2 – Slate Blue K-PAINT-012-SB
AT – Seeon Yellow 013 AT – Seeon Yellow K-PAINT-013-SY
AT – Arran Blue 014 AT – Arran Blue K-PAINT-014-AB
Kinesis - Paint - Galactic-1 Set - 2 Aerosols na Galactic – Blue K-PAINT-014-GC

Paint Stick User Guide


Ensure you have all the necessary items needed to carry out your repair these are:-

• Disposable Gloves
• Acetone (Thinners)
• Scuffing Pad
• Primer
• Solid Colour (Base-coat)
• Clear Lacquer (Top Coat)


Step 1
Ensure surface to be painted is thoroughly clean by washing with thinners this will remove any grease oil or dirt there by reducing any chance of the paint not curing correctly.


Step 2
Where bare metal is exposed a cellulose white primer should be applied, this acts as a rust deterrent, however conversely on no account should primer be left without a topcoat as by its nature it is porous and will encourage rust spots to form. Leave the primer to dry for about 30 minutes.


Step 3
Prepare your base colour coat by shaking the paint bottle for at least 2 minutes. The paint can separate during storage which can cause the paint to thin or change colour. 2 minutes ff shaking will ensure the paint is fully mixed and ready. Having ensured that the primer is dry apply the basecoat over the affected area, the paint should be applied in small delicate brush strokes in same direction (e g left to right) Leave to dry for ¾ of an hour. Resulting in a matt finish.


Step 4
Finally apply a clear lacquer topcoat this will ensure that a full gloss finish is achieved.
Leave to dry for further ¾ of an hour.


Notes

• Always use paints in well ventilated environment

• Touch up paint is only a cosmetic remedy and may not provide an accurate colour match

• As paints by their nature are harmful always dispose of waste products responsibly

• Avoid contact with the skin or eyes

• Apply paint in an ambient temperature of between 10 and 30 degrees Celsius


Fields marked * are required
Browse…
 
We Now Accept
SagePay_Icon
Visa_Icon
VisaDebit_Icon
VisaElectron_Icon
MasterCard_Icon
PayPal_Icon
V12 Finance

We have placed cookies on your device to help make this website better.