This is not a Road Disc Tubular Wheel rebadged for Cyclo-Cross, the Sector CT30 is a Wheelset developed from the rim to the hub, built to be perfectly tailored for Cyclo-Cross.
The Sector CT30 Cyclo-Cross Wheelset has been developed in partnership with wheel industry expert, Paul Lew. He has designed the Carbon CT30 Rim with a custom laminate and lay-up, exclusively for us, to ensure the impact strength of the Rim meets the demands of Cyclo-Cross.
For the Sector CT30 wheel we started with rim. We chose a 30mm deep carbon tubular rim as we feel this is the ultimate Cyclo-Cross sweet spot for weight, mud shedding ability, stiffness and aerodynamics. We have custom designed the carbon CT30 laminate and impact performance within our existing tooling to meet the specific requirements for use as a Cyclo-Cross disc brake rim. This will ensure your wheels will withstand multiple seasons of brutal Cyclo-Cross races.
Cyclo-Cross puts a demanding amount of torque on the rear hub, often in very muddy and wet conditions. Into the CT30 we have laced a rear hub with a four-pawl ratchet and oversized pawls to ensure engagement never fails. Both front and rear hubs are fitted with high quality double sealed bearings to keep the worst of the mud out. The lightweight 7075-T6 Aluminium alloy hub shells feature angled flanges to ensure that they follow the path of the spoke, reducing the stress on the spoke and increasing its lifespan.
Elite & Under 23 National Women's Cyclo-Cross Champion 2020
#ridesector
| |
| Wheel Size |
700c |
| Rim Material |
T-700 Unidirectional Carbon Fibre |
| Spokes |
Pillar 1416 DB J-Bend |
| Nipples |
Pillar Pro Alloy |
| Hub Rotor Fitment |
Centrelock |
| Freehub |
4 Pawl | Shimano HG |
| Holes |
24h |
| Rim Width |
(Internal) 24mm | (External) N/A |
| Rim Depth |
30mm |
| ERD |
N/A |
| Tubeless |
No |
| End Caps |
(Front) 100x12mm | (Rear) 142x12mm |
| Included Extras |
QR End Caps |
| Weight |
1400g |
TECHNICAL INFORMATION
RIM
For replacement rims check out the
Rim Page.
SPOKES
| |
| Pillar 1416 J-Bend Double Butted |
9.0 |
2.0 |
1.6 |
95° |
6.2 |
160-310 |
4.7g |
| |
| All dimensions in mm |
FRONT
Drive: 284mm x 14
Non-Drive: 280mm x 14
REAR
Drive: 280mm x 14
Non-Drive: 282mm x 14
Replaceable with other equivalent spokes of the same dimensions.
NIPPLES
Pillar Pro Alloy
Complete freehub available as a spare: Click Here
For any other technical queries please get in touch - info@sectorwheels.cc
WARRANTY
All Sector aluminium rims, or carbon rims without Innegra tech, are guaranteed against manufacturing defects for three years after the original purchase date of the product, except decal defects, which are covered for one year only.
For full Warranty information
Click Here.
We recommend fitting Challenge handmade tubular tyres with 20mm wide Effetto Mariposa Carogna tubular tape, with an application of Effetto Mariposa tubular tape primer.
If you're viewing on your mobile phone please look under the 'CROSS SELL' tab for the relevant product links to both recommended products.
Event: Veteran 50+ in the first round HSBC National Trophy Cross, Saturday 6th October 2018 at Moorways, Derby.
A small group including Tim Davies battled at the sharp end for the whole race.
Tim finished in 5th position just 13 seconds behind the lead and said... “The Sector Wheels performed perfectly in slippery conditions, shod with the grippy Challenge Limus tubulars. The feel is fantastic, light and responsive.”
Photo credit: Spencer Davies