Cutting edge alloy Aithein disc frameset designed to be ridden fast and carry you far.

*Available as a Frameset Only.

2 Colour options: Anodised Black or Metallic Cyan

Super plastic formed hyperlight alloy frame

Tapered headtube with tuned disc fork and flat disc mount

Internal cable routing for mechanical and electronic gears and rear brake.

The Kinesis Aithein Disc frame has clearance for up to 28mm Tyres on a racing inspired frame (depending on rim tyre combination)

Tapered Aithein disc fork with post mount 140mm brake mount.

The Kinesis Aithein disc frameset includes Fork, Headset, Seat Clamp and rear 140mm flat mount to Post Mount Adaptor

FRAME PARTS KIT GUIDE

• Superlight SPF shaped Kinesium tubing, 1300g frame weight [53cm]
• Internal routing for gears and rear brake
• Di2 ready
• Tapered headtube 1”1/8 / 1” 1.5 36 x 45 integrated FSA type
• BSA threaded 68mm with cable/hose ports
• Includes Fork, Headset, Seat Clamp and comes with Post Mount Brake Adapters - Please note the maximum rear rotor size you can use is 140mm.
• QR Front and Rear (does not include rubber grommets)
• 135mm Rear Hub Spacing
• 31.6mm Seatpost [ Di2 battery post available]
• 34.9mm Seat Clamp
• Braze Front Mech fitting
• 22mm long flat mount disc brake bolts required for the frame.
• Sizes: 47cm- 50cm – 53cm - 56cm – 59cm
• Colours - Anodised Black & Metallic Blue

The Aithein disc frame is made from Kinesium tubing and shaped using SPF [super plastic forming] technique to fine tune the tubing for a balance of stiffness and strength at the lowest possible weight.
The seat tube at the core of the frame is optimised for lateral stiffness for maximum power transfer.

To get the benefits from extra disc brake power we’ve provided more tyre clearance - up to 28mm for more rubber on the road for more grip, less rolling resistance and a little more comfort too.
We’ve tuned the geometry also for a little more stability adding to the fun factor of this fast road bike.

The Aithein disc frame now features full internal routing in the Downtube for a much cleaner look, to achieve this a special new BB design with integrated ports for the internal routing providing clean routing with low weight.
We have also gone back to the dependable threaded BB standard.

The inboard rear disc mount is cold forged and very minimal to accept the new flat mount brakes, an adapter to post mount is included.

To match the new frame we have the new tapered full carbon monocoque disc fork with post mount and internal hose routing with weight of 450g.

Please Note: Minimum 52t front chainring.

CONCLUSION
Kinesis has kept everything we loved about the Aithein and added disc brakes.
Incredibly, chainstay length stays the same (405mm) while giving room for 28mm tyres.

Bikes ETC - Article